Available Models
- 5004-PC : 4″ Part-Circle
- 5004-PCSAM : 4″ Part-Circle with Check Valve
- 5004+PCSAMR : 4″ Part-Circle with Check Valve and Pressure Regulation
- 5004+PCSAMRNP : 4″ Part-Circle with Check Valve, Pressure Regulation and Non-portable Cover
- 5004+PCSAMRSS : 4″ Part-Circle with Check Valve, Pressure Regulation and Stainless Steel
- 5004+PCSRSSNP : 4″ Part-Circle with Check Valve, Pressure Regulation, Non-portable Cover and Stainless Steel
- 5006+PCSAMR : 6″ Part-Circle with Check Valve, Pressure Regulation
Features
Rain Curtain Nozzle Technology
- Rain Curtain Nozzles standard on all 5000 Series Rotors
- Large water droplets for greater wind resistance
- Effective close-in watering
- Even distribution over the entire radius
- Tree of nozzles including four low angle (angle of trajectory 10°) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25°) provides 25′ to 50′ (7.6m to 15.2m) distance of throw
- Self-aligning nozzles
Installation and Maintenance
- Slip clutch mechanism for quick adjustment on installation
- Faster maintenance with a new self-cleaning arc adjustment screw
- The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation
- Top-adjust arc adjustment requiring only a flathead screwdriver
- Radius adjustment screw allows up to 25% radius reduction without changing nozzles
Design Solutions
- 5000 Series available in 4”, 6” models with optional stainless steel stems
- Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25′ to 35′ (7.6 to 10.7m)
- Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover
- 40-360° arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available)
- True 4″ (10 cm), 6″ (15.2 cm) and 12″ (30.5 cm) pop-up (measured from the cover to the nozzle)
Durability
- Heavy-duty cover assembly for extra durability in residential or commercial applications
- Heavy-duty retract spring assures positive pop-down
- Pressure-activated triple-blade multi-function wiper seal protects internals from debris and assures positive pop-up and retraction
- Additional O-rings and seals for extra protection in “gritty” water
Options
- Stainless steel riser helps deter vandalism on public turf areas (4″ and 6″ models only)
- Pre-installed Rain Curtain Nozzle on most popular 5000 and nozzle combinations
- Seal-A-Matic (SAM) check valve holds up to 7 feet (2.1m) of elevation change to prevent puddling and erosion caused by low head drainage
- Purple cover for easy identification of non-potable systems
Operating Range
- Precipitation rate: 0.20 to 1.5 in/hr (5 to 37 mm/hr)
- Radius: 25 to 50 feet (7,6 to 15,2 m)
- Radius may be reduced up to 25% with radius reduction screw
- Pressure: 25-65 psi (1,7 to 4,5 bar)
- Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)
Specifications
- 3/4″ NPT female bottom threaded inlet
- Reversing full and part circle adjustment 40° – 360°
- Full circle only adjustment 360°
Dimensions
- Pop-up height: 4″ (10,2 cm); 6″ (15,2 cm)
- Overall body height: 4″: 7 3/8″ (18, 5 cm); 6″: 9 5/8″ (24,5 cm)
- Exposed surface diameter: 1 5/8″ (4,1 cm)
Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down
Optional PRS Feature
- In-stem pressure regulator (PRS) reduces operating pressure to 45 psi (3,1 bar) for optimal nozzle performance
- PRS saves water by:
- Eliminating head-to-head pressure variations
- Eliminating misting due to high pressure
- Improving nozzle distribution uniformity by operating the nozzle at optimum pressure
- Maintenance-free design can be easily retrofitted into existing 5000/5000+, T-Bird™ and Hunter® PGP™ (using UPG model) rotor cases without digging up the entire body
- Pressure: 25-65 psi (1,7 to 4,5 bar)
Reviews
There are no reviews yet.